เครื่องวิเคราะห์ธาตุด้วยเปลวไฟ รุ่น: BWB-SYN FUELS
เครื่องวัดค่าเปลวไฟ BWB SYN FUELS เป็นเครื่องวัดค่าโฟโตสเฟียร์ชนิดแรกและตัวเดียว พร้อมด้วยการตรวจจับและแสดงผลทั้ง 4 องค์ประกอบพร้อมกัน BWB SYN FUELS เป็นอุปกรณ์ที่มีคุณภาพและประสิทธิภาพสูงในด้านการใช้เทคโนโลยีสมัยใหม่เพื่อปรับปรุงความถูกต้องและความมั่นคงตลอดจนลดเวลาในการวิเคราะห์
ยี่ห้อ: BWB ประเทศ: สหราชอาณาจักร
This powerful and growing global industry now has the attending facilities for Synthetic Fuels or Bio-Fuels production. For this derivative product BWB Technologies offers a hybridized Flame Photometer we have named Syn Fuels.
The BWB SYN FUELS Flame Photometer is the first and only 4 channel flame photometer with simultaneous detection and display of all 4 elements. A high quality and high performance instrument, the BWB SYN FUELS employs modern technology to improve both accuracy and stability while significantly reducing analysis time.
The fluid handling sections of the BWB SYN FUELS Flame Photometer
incorporate proprietary engineered thermoplastics that are highly chemically resistant to withstand the solvents encountered in Synthetic Fuels production facilities.
The majority of our Global clients purchases a BWB Sugar FES for the
beet or cane refining plant and the Syn Fuels FES for the bio-conversion plant site.
For non Sugar processors embracing Syn Fuels, the BWB XP is typically the BWB FES of interest during the bio-conversion processes.
Technical Data
Sample rate
3.5 – 7ml/min
Tubing materials
PTFE and Teflon
Required desk space for Instrument
50cm (H) x 45cm (W) x 45cm (D)*
For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.
Instrument size
Syn Fuels Flame Photometer
51cm (H) x 38cm (W) x 41cm (D)
(20in x 14in x 16in)
Shipping
62cm (H) x 55cm (W) x 47cm (D)
(24in x 22in x 19in)
Weight
Syn Fuels Flame Photometer – 15.3kg
Shipping – 25kg
Optimal range
Single point calibration
Na 0.1 – 60ppm
K 0.05 – 100ppm
Li 0.05 – 50ppm
Ca 1.0 – 100ppm
Multi Point Calibration
Na 0.1 – 1000ppm
K 0.05 – 1000ppm
Li 0.05 – 1000ppm
Ca 1.0 – 1000ppm
Reproducibility
<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation).
Specificity
Na/K/Li = <0.5% to each other when equal in concentration at <100ppm
Limit of detection (LOD) and
limit of quantification (LOQ) displayed
LOD LOQ
Na – 0.03ppm Na – 0.1ppm
K – 0.02ppm K – 0.05ppm
Li – 0.02ppm Li – 0.05ppm
Ca – 0.3ppm Ca – 1ppm
Time to stability
Less than 15 seconds after sample
is introduced into the flame
Ions measured
Simultaneous measurement of Na, K, Li, Ca
Interfaces
USB
0-2.5 volt output (based on sample concentration linked to element of users choice)
Optional 4-20mA output in place of the above
Optional integrated printer
.CSV and .PDF generated reports and files via FP-PC software
Collection Cup fitted as standard allowing live reading
Recommended minimum warm up
time based on ambient temperature
21°C – 40 minutes
Power requirements
100V – 250V AC at 50 or 60Hz
Fuel requirement
Propane, Butane or Natural Gas*
regulated to 19Bar. Flow rate of 0.4l/min
*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.
Readout
LCD, four line, alpha numeric, back lit.
The BWB SYN FUELS Flame Photometer is the first and only 4 channel flame photometer with simultaneous detection and display of all 4 elements. A high quality and high performance instrument, the BWB SYN FUELS employs modern technology to improve both accuracy and stability while significantly reducing analysis time.
The fluid handling sections of the BWB SYN FUELS Flame Photometer
incorporate proprietary engineered thermoplastics that are highly chemically resistant to withstand the solvents encountered in Synthetic Fuels production facilities.
The majority of our Global clients purchases a BWB Sugar FES for the
beet or cane refining plant and the Syn Fuels FES for the bio-conversion plant site.
For non Sugar processors embracing Syn Fuels, the BWB XP is typically the BWB FES of interest during the bio-conversion processes.
Technical Data
Sample rate
3.5 – 7ml/min
Tubing materials
PTFE and Teflon
Required desk space for Instrument
50cm (H) x 45cm (W) x 45cm (D)*
For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.
Instrument size
Syn Fuels Flame Photometer
51cm (H) x 38cm (W) x 41cm (D)
(20in x 14in x 16in)
Shipping
62cm (H) x 55cm (W) x 47cm (D)
(24in x 22in x 19in)
Weight
Syn Fuels Flame Photometer – 15.3kg
Shipping – 25kg
Optimal range
Single point calibration
Na 0.1 – 60ppm
K 0.05 – 100ppm
Li 0.05 – 50ppm
Ca 1.0 – 100ppm
Multi Point Calibration
Na 0.1 – 1000ppm
K 0.05 – 1000ppm
Li 0.05 – 1000ppm
Ca 1.0 – 1000ppm
Reproducibility
<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation).
Specificity
Na/K/Li = <0.5% to each other when equal in concentration at <100ppm
Limit of detection (LOD) and
limit of quantification (LOQ) displayed
LOD LOQ
Na – 0.03ppm Na – 0.1ppm
K – 0.02ppm K – 0.05ppm
Li – 0.02ppm Li – 0.05ppm
Ca – 0.3ppm Ca – 1ppm
Time to stability
Less than 15 seconds after sample
is introduced into the flame
Ions measured
Simultaneous measurement of Na, K, Li, Ca
Interfaces
USB
0-2.5 volt output (based on sample concentration linked to element of users choice)
Optional 4-20mA output in place of the above
Optional integrated printer
.CSV and .PDF generated reports and files via FP-PC software
Collection Cup fitted as standard allowing live reading
Recommended minimum warm up
time based on ambient temperature
21°C – 40 minutes
Power requirements
100V – 250V AC at 50 or 60Hz
Fuel requirement
Propane, Butane or Natural Gas*
regulated to 19Bar. Flow rate of 0.4l/min
*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.
Readout
LCD, four line, alpha numeric, back lit.